WALK-IN XC
WALK-IN XC is the epitome of open-plan showering. 10 mm thick single panel safety glass held in place by an elegant, slim wall profile. Available in widths of up to 1450 mm and heights of up to 2000 mm, or widths of up to 1250 mm and heights of up to 2200 mm, it stands there without any stabilizers – perfectly minimalist.
Advantages
- Minimalist profile design.
- High-quality 10 mm thick single panel safety glass* in accordance with EN 12150-1.
- High-quality anodised aluminium profiles* in high-gloss silver, paint finish applied over the anodised aluminium as an EXTRA option.
- Technically sophisticated WALK-IN solution without additional stabilizers.
- Series height 2000 mm.
- Standard widths for all standard shower trays and Kermi Duschdesign wet floor systems.
- Custom sizes and bespoke solutions available as EXTRA options.
- Made in Germany.
- Tested in accordance with DIN EN 14428 (CE) and PPP 53005 (TÜV / GS).
- 20-year guarantee on the availability of spare parts after the model has been discontinued.
Impressions and inspiration
Accessories
Guide
cleaning
Proper cleaning is important.
To ensure your shower enclosure stays sparkling clean for a long time, we recommend regular cleaning after each use. After showering, you should rinse the interior surfaces first with warm water, then with cold water, and dry them thoroughly. Profiles and discs must only be cleaned with mild, standard cleaning and care products, e.g. diluted vinegar water (mixing ratio 1:1). Under no circumstances should abrasive cleaners, alcohol or nitro thinner etc. be used.
Not sure which cleaning agents are suitable for your Kermi Duschdesign shower enclosure?
Our recommendation: Our PremiumCLEAN cleaning agents, which have been specially developed for the gentle cleaning of our high-quality shower enclosures.
Maintenance
Minimal maintenance for optimal performance.
It is advisable to lubricate the guide rails, rollers and hinges once a year, for example with Vaseline or silicone spray, and to tighten the screws on the rollers, metal hinges and rising hinge mechanism to ensure smooth operation for many years to come.
CLEAN easy cleaning coating
The ‘Teflon effect’ for your shower enclosure.
The Kermi Duschdesign CLEAN easy cleaning coating for safety glass is the ideal choice if you want to minimise the effort required for cleaning. A special surface coating prevents dried water droplets, soap residue, dirt and limescale from becoming stubbornly embedded. It also prevents germs and bacteria from settling, ensuring improved hygiene.
For cleaning, we recommend soft, non-abrasive cloths and standard, non-abrasive cleaning agents.
Further products
Surfaces
glasses
Also available with the easy cleaning coating CLEAN
